| | | | |  Spare parts for all Mass equipment available
For more info click on the logo (authorization required)
PCB EQUIPMENT
Vacuum Plugging Machine VCP 5000-1
Double click the picture to download a short video on this unit
| - Panel is placed inside the machine and vacuum is optionally drawn inside the chamber depending on the hole fill requirements
- Utilizing a similar principle as the hand-held unit, compressed air is used to force the material into a designated head and then through the via holes
- Depending on factors, such as hole quality and paste rheology, holes up to 1:40 aspect ratio can be filled; the vacuum is not needed for through-holes
- Cu plated blind vias can be easily filled without any voids utilizing the vacuum
- Excess material is removed by squeegee system
| | | 
| NEW! Via Hole Filling VHF 300V
w/ a Vacuum function Flexible plugging machine allowing different types of panels and pastes to be processed handles boards at the extreme ends of the board thickness spectrum (up to 350 mil) minimizes consumption and waste of paste (smaller heads can be used) Max. panel size 24” x 30” Thickness range is up to 350 mil thick 480 Volt, 3 Phase power connection, 4 kW The touch panel display allows up to 50 recipes to be stored Head sizes available: 5”-12" Speed of head movement in the X and Y direction
| | |  | Plane Raze Device SV100
Uniform finish with fine surface roughness - Superior sanding is achieved by sanding pressure controlled rotation and oscillation head motion
- Sanding after hole plugging
- Deburring and dressing after
- through hole drilling (thick panels
- Dressing after plating, built-up PCB
- Dressing and cleaning of stainless press plates
- Dressing of multilayers
|
| |
| |
|
|
